Cover

Contents

1

Fabrication of silicon rubber - ferrofluid composite actuator

Thuy Nguyen Thi Bich, Thuy Tran Thi Thu, Tien Nguyen Hong, Duong Khuat Duc,Thinh Hoang Xuan, Huong Nguyen Thi Thu, Shridhar.S.Deshmukh, Shailesh Shirguppikar, Pankaj.B.Gavali, Vaibhav Ganachari, Praveen S. Atigre

DOI: http://doi.org/10.57001/huih5804.2025.238

P. 3

2

A case study of macropartical reducing while coating TiAlCN by arc cathode using permanent magnet

Nguyen Duc Luan, Pham Duc Cuong

DOI: http://doi.org/10.57001/huih5804.2025.239

P. 10

3

Application of pre-impulse in the design of automatic weapons based on the free breech principle

Dao Van Doan, Nguyen Dinh Hoang Anh, Kieu Duy Thanh

DOI: http://doi.org/10.57001/huih5804.2025.240

P. 17

4

Multi-material fabrication of stainless steel to nickel alloy parts using direct laser metal deposition: A review

Quan Nguyen Van, Hoang Nguyen Van, Tuoi Do Xuan, Khoa Doan Tat

DOI: http://doi.org/10.57001/huih5804.2025.241

P. 22

5

Research on the influence of structural parametersof fume extractor on its performance on the tankusing Ansys Fluent software

Lai Thanh Tuan, Dinh Hoang Quan

DOI: http://doi.org/10.57001/huih5804.2025.242

P. 29

6

Study on the determination of the optimal heat exchange tube type for hydraulic fluid coolers in hydraulic excavators

Giang Quoc Khanh, Nguyen Long Hai, Nguyen Danh Phuong, Vu Thi Duyen

DOI: http://doi.org/10.57001/huih5804.2025.243

P. 33

7

Numerical analysis of minor head losses in 3D flow geometries using finite element modeling

Nguyen Manh Hung, Vu Manh Hieu,Ha Truong Sang

DOI: http://doi.org/10.57001/huih5804.2025.244

P. 40

8

A review on wire arc additive manufacturing for industrial component repair and restoration

Van Thuc Dang, Van Thao Le,Trung Thanh Nguyen

DOI: http://doi.org/10.57001/huih5804.2025.245

P. 48

9

Application of WC-Ni plasma spray coating technologyto restore and enhance wear resistance for lathe slideways

Dang Xuan Thao, Bui Son Hai,Vu Dinh Cuu, Nguyen Tien Can

DOI: http://doi.org/10.57001/huih5804.2025.246

P. 55

10

Navier-stokes prediction of aerodynamic characteristicsof a 7.62mm spin-stabilized projectile at supersonic speeds

Bui Xuan Son, Do Van Minh,Bui Minh Tuan, Nguyen Hai Minh,Doan Van Dung, Nguyen Quang Tuan

DOI: http://doi.org/10.57001/huih5804.2025.247

P. 61

11

AI-based automotive engine diagnostics:Exploring the enginefaultdb dataset for fault detection

Van-Trung Nguyen, Tran-Phu Nguyen,Ly Vinh Dat

DOI: http://doi.org/10.57001/huih5804.2025.248

P. 68

12

Research on the motion stability of self-balancingtwo-wheelers

Nguyen Phi Truong,Vu Ngoc Quynh, Nguyen Manh Dzung

DOI: http://doi.org/10.57001/huih5804.2025.249

P. 76

13

An improved wild horse optimizer algorithm for electric vehicle charging stations combinated distributed generation and battery storage system

Thien Vo Minh, Tien Doan Thi Kieu, Lan Anh Tran Thi, Thong Luong Van,Trien Huynh Phat, Dieu Vo Ngoc

DOI: http://doi.org/10.57001/huih5804.2025.250

P. 82

14

The influence of characteristic parameters on the performance of fatigue lane departure recognition model

Le Dinh Dat

DOI: http://doi.org/10.57001/huih5804.2025.251

P. 89

15

Simulation study of vibration of 5-seat sedan

Le Duy Long, Nguyen Thanh Quang, Le Hong Quan, Nguyen Xuan Khoa,Tran Huy Hoang, Le Dinh Dat, Tran Duc Binh

DOI: http://doi.org/10.57001/huih5804.2025.252

P. 94

16

Analysis and optimization of some oscillation parametersof the thermal exhaust valve system modelin internal combustion engines

Cong Truong Chi, Tai Nguyen Van,Hue Pham Thi Minh

DOI: http://doi.org/10.57001/huih5804.2025.253

P. 99

17

Simulation study of ABS brake system using Carsim software

Nguyen Trung Kien, Nguyen The Luong, Pham Minh Hieu, Than Quoc Viet,Pham Hoa Binh, Do Van Tuan

DOI: http://doi.org/10.57001/huih5804.2025.254

P. 102

18

Simulation study to evaluate the charging efficiencywhen improving the charging intake manifoldfor a single cylinder diesel engine manufactured in Vietnam

Nguyen Tuan Nghia, Nguyen Phi Truong, Nguyen Xuan Khoa

DOI: http://doi.org/10.57001/huih5804.2025.255

P. 109

19

Experimental study and evaluation of vibrationin a 5-seat sedan

Le Duy Long, Nguyen Thanh Quang, Le Hong Quan, Nguyen Xuan Khoa,Nguyen Viet Hoa, Le Dinh Dat, Tran Duc Binh

DOI: http://doi.org/10.57001/huih5804.2025.256

P. 115

20

Optimizing brake disc structure through heat dissipationand mass reduction using Optislang

Truong Dang Viet Thang, Nguyen Giang Nam, Doan Hoang Long, Tran Quang Han, Nguyen Thanh Tung, Pham Quang Tuan

DOI: http://doi.org/10.57001/huih5804.2025.257

P. 119

21

Comprehensive climate shape analysis and optimizationfor SUV body design to enhance fuel efficiency

Minh Hieu Pham, Dinh Van Tra,Nguyen The Anh, Truong Huy Phong,Chu Duc Hung, Nguyen Duc Trong,Do Thai Phuong

DOI: http://doi.org/10.57001/huih5804.2025.258

P. 125

22

Analysis and selection of electric motors for electric vehicles in Vietnam

Le Hoang Long, Khong Vu Quang,Pham Huu Nam, Le Thi Hoang Linh

DOI: http://doi.org/10.57001/huih5804.2025.259

P. 129

23

Evaluating the characteristics of the actuator mechanismin the air suspension systems on automobiles

Do Trong Tu, Bui Trung Duc,Pham Hai Trinh, Vu Van Tan

DOI: http://doi.org/10.57001/huih5804.2025.260

P. 137

24

Experimental study on determining the torsional stiffnessof anti-roll bar in truck

Ngo Van Dung, Vu Van Tan,Truong Manh Hung

DOI: http://doi.org/10.57001/huih5804.2025.261

P. 142

25

The effect of blade pitch angle on the airflow of axial fanat different operational conditions

Nguyen Duc Trung, Nguyen Truong Giang, Phan Minh Thuy, Nguyen Thi Thu Hien, Trinh Huu Truong, Vu Dinh Hieu,Thach Ngoc Mai, Nguyen Duc Nam, Nguyen Van Khuyen, Nguyen Trong Linh, Le Minh Toi, Nguyen Trung Hieu

DOI: http://doi.org/10.57001/huih5804.2025.262

P. 150

26

Effect of interlining fusing parameters on peel strengthandshrinkage of fused fabric

Nguyen Thi Le, Tran Thi Hoa

DOI: http://doi.org/10.57001/huih5804.2025.263

P. 156

27

Design of furnace head temperature control system design for 3D printer using fuzzy logic controller

Thanh-Lam Bui, Van-Truong Nguyen, Dinh-Hieu Phan, Duc-Quang Nguyen, Hoang-Anh Do, Minh-Thuan Le,Van-Tu Phung

DOI: http://doi.org/10.57001/huih5804.2025.264

P. 162

28

Control rotary inverted pendulum model balancingusing an improved fuzzy controller based on a quantum swarm optimization algorithm

Thanh-Lam Bui, Van-Truong Nguyen, Ngoc-Tien Tran, Duc-Quang Nguyen, Tuan-Hung La, Minh-Quang Nguyen, Trung-Thanh Le

DOI: http://doi.org/10.57001/huih5804.2025.265

P. 168

29

Adaptive sliding mode control for twin rotor MIMO system using radial basis function neural network

Dinh Hieu Phan, Van Truong Nguyen, Thanh Lam Bui, Dinh Truong Nguyen

DOI: http://doi.org/10.57001/huih5804.2025.266

P. 175

30

Inverse kinematics and singularity analysis of a kinematically redundant parallel robot

Thanh-Trung Do, Van-Truong Nguyen

DOI: http://doi.org/10.57001/huih5804.2025.267

P. 180

31

Tool wear segmentation using YOLOv11 for enhanced machining efficiency

Cong-Duy Do,Tien-Dung Hoang,Quang-Truong Tran, Van-Truong Nguyen, Thanh-Binh Nguyen

DOI: http://doi.org/10.57001/huih5804.2025.268

P. 185

32

A battery harvesting Buck-Boost converter using dual path operation for inductor current reduction

Trung Kien Vu, Xuan Canh Pham, Xuan Thanh Pham

DOI: http://doi.org/10.57001/huih5804.2025.269

P. 189

33

The design of trajectory tracking controller for mobile robots using feedforward-feedback methods

Anh-Tu Nguyen, Cong-Thanh Vu,Thai-Hoc Phan, Tien-Phuong Nguyen, Thanh-Tung Pham

DOI: http://doi.org/10.57001/huih5804.2025.270

P. 194